Mega-Track Hanger Short
Mega-Track Hanger - Short
The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track just 3/16 of an inch below the grid pipe.
The Mega-Track Hangers use a Mega-Gridlock half to fasten over the pipe and secure from below with four 5/16" socket head screws. The Mega-Gridlock half has slots along the edge that act like a wrench to hold the four Nyloc nuts from turning during installation. Only a slight downward pressure with your fingers is required to hold a nut in place for installation. The track hanger slides over the track prior to placing the track in position. Support track approximately every 4 feet.
Safe Vertical Working Load: 300 Pounds
Hardware: 4 each 5/16" × 2" socket head Cap Screws and Nyloc Nuts
Dimensions: 3.65 × 3.65 inches
Weight: 1 Lb
|Finish||Aluminum - Black|
|Material||Steel - Aluminum|
|Kit||Gridlock half - track hanger - fasteners|