2914 Silver Service In-Line Machine for 140 Track

2914 Silver Service In-Line Machine for 140 Track

Price Ranges
Full Bulk:
Item #

5,836.02 per Unit(s) 5836.02 USD


Make a valid product selection to continue.

Minimum Purchase Required: 1 Unit(s)
Add to Cart

Do you have questions about this product?
Contact us for answers.

2914 Silver Service In-Line Machine. 1/2 H.P.

This machine is specifically designed to work with No. 140 Series tracks, and for projects requiring the curtain machine to be located off of the finished floor. This model machine is designed to attach to, and align with, the curtain track and be supported by an overhead structure via eye-bolts mounted to the machine’s base. The machine eliminates the vertical operating cables that normally run from a floor mounted machine to the track live-end pulley. The control box for this model machine is connected by 6' of BX cable to the machine. Control is stop/start/reverse from any point of travel. 

This machine is available for special situations only. It does not carry a UL or ETL listing at this time. Please contact the factory for additional information on this machine. 

Machines can be equipped with friction brakes at additional cost.

These machines are not to be used for the lifting, supporting, or transporting of people. These machines should not be used to move objects over areas where people are present unless suitable safety devices are installed.

Inline machines utilize track mounted direct strike limit switches to signal the fully open and fully closed positions of the curtains. You received 2 track mounted limits with their roller yokes attached in the correct orientation. You should not have to move the roller yokes of the limit switches. 

2914 Silver Service In-Line Machine. 1/2 H.P.

Horsepower: 1/2 

Volts: 120 

Phase: 1 

Cable speed: 90/45 fpm 

Number of wires for remote control: 4 (plus ground) 

Control voltage: 24 VAC 

Approximate dimensions: 18"L x 18"W x 18"H 

Approximate shipping weight: 55 lbs 

Odoo text and image block

Specifications for 2914 Silver Service In-Line Machine for 140 Track

Cable Speed 90/45 fpm (2.30/1.15 mpm)
Control voltage 24 VAC
Maximum cable travel
Number of wires for remote control 4 (plus ground)
Phase 1
Volts 120V
Height 18 in (45.72 cm)
Length 18 in (45.72 cm)
Width 18 in (45.72 cm)
Weight 55 lbs (25 kg)
Mounting Spec Suspended - Left - Suspended - Right - Ceiling mount - Left - Ceiling mount - Right
Curtain Separation Speed ND
Key Features
Machine Power 1/2 Horsepower
Maximum cable pull