2904TV SILVER SERVICE® Curtain Machine. 1/2 H.P.

Price Ranges
Full Bulk:
Item #0024-001585

8,709.00 8709.0 USD 8,709.00


  • Cable Speed
  • Control voltage
  • Maximum cable travel
  • Number of wires for remote control
  • Phase
  • Volts
  • Height
  • Length
  • Width
  • Weight
  • Curtain Separation Speed
  • Key Features
  • Machine Power
  • Maximum cable pull

This combination does not exist.

1 yard(s)
914.99 meter(s)
Minimum Purchase Required: 1 Unit(s)
Cable Speed: 86 fpm (26 mpm)
Control voltage: 24 VAC
Maximum cable travel: 45 ft
Number of wires for remote control: 6
Height: 27 in (69 cm)
Length: 13 in (33 cm)
Width: 16 in (40 cm)
Weight: 120 lbs (55 kg)
Curtain Separation Speed: 0 to 3 fps (0 to 0.90 mps)
Machine Power: 1/2 Horsepower
Maximum cable pull: NA
see more... see less...
Do you have questions about this product?
Contactus for answers.

2904TV SILVER SERVICE® Curtain Machine. 1/2 H.P.

The No. 2904-TV curtain motor combines maximum versatility with the power needed to operate small to medium sized draw curtains. Draw curtain machine with electronic frequency control. The most versatile of the ADC line, these machines provide all of the features of an intermediate draw machine plus user definable variable speed control, acceleration ramps, deceleration ramps, overload protection, low voltage control, emergency stop loops and a host of other features. In addition these machines allow the use of inverter duty 3-phase motors on single phase power sources. Machines are equipped with integral limit switches for deceleration and emergency over-travel, programmable frequency drive units, low-voltage control, and can be operated from any number of remote control stations (except speed adjustment if so equipped). Drum is 10" diameter x 5" wide and is grooved for 3/16 wire center cable. Cable speed is 0 to 86 fpm. Drum upgrade to 10" x 7" available. 

Guard (ME-1) not shown. Required for ETL compliance. 

Draw curtain machines and drapery motors cannot be used for lifting, since they are not designed for an overhung type of load. 


Assures positive drive without cable slippage. Constructed of aluminum 10" diameter x 5" long. Coated wire-center cable must be used. Drum must be at least 10' from track live end pulley, or last  pulley in system to allow cable to wind properly on drum. 


Facilitates hand operation of curtain in case of mechanical or power failure. Not supplied when cable tension device is furnished. 

Speed cannot be adjusted while machine is operating without effecting limit positions.

2904TV SILVER SERVICE® Curtain Machine. 1/2 H.P.

Horsepower: 1/2 

Volts: 120/220 (1 phase) or 208/230 (3 phases) 

Phase: 1 or 3 

Cable speed: 86 fpm 

Curtain Separation Speed: 0 to 3 fps 

Maximum one way cable travel: 45 feet. 

Number of wires for remote control: 6 

Control voltage: 24 VAC 

Approximate dimensions: 13"L x 16"W x 27"H 

Approximate shipping weight: 120 lbs (175 lbs with guard) 

Odoo text and image block