Mega-Track Hanger, Long

Mega-Track Hanger, Long

Item #

18.80 per Unidad(es) 18.8 USD


Make a valid product selection to continue.

Minimum Purchase Required: 1 Unidad(es)
Agregar al carrito

Tiene preguntas respecto a este producto?
Contáctenos y le daremos respuestas.

MTLM Mega-Track hanger, Long

The Mega-Track Hanger makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. 

The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset length from the track to the pipe the diameter of the bottom grid pipe plus 3/16 of an inch. The Mega-Track hanger Long has two different track hanging slots so that it will work with either 1-1/2" or 1-1/4" schedule 40 pipe grids. Both of the Mega-Track Hangers use a Mega-Gridlock half to fasten over the pipe and secure from below with four 5/16" socket head screws. The Mega-Gridlock half has slots along the edge that act like a wrench to hold the four Nylock nuts from turning during installation. Only a slight downward pressure with your fingers is required to hold a nut in place for installation. The track hanger slides over the track prior to placing the track in position. Support track approximately every 4 feet. 

Safe Vertical Working Load: 300 Pounds 

Hardware: 4 each 5/16" × 2" socket head Cap Screws and Nylock Nuts 

Dimensions: 3.65 × 3.65 inches 

Weight: 1 Lb 

There are two versions of the Mega-Track Hanger, and the alternate Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track just 3/16 of an inch below the grid pipe.

Especificaciones: Mega-Track Hanger, Long

Material Steel - Aluminum
Acabado Aluminum - Black
Peso 1 lb
Kit Gridlock half - track hanger - fasteners