1. Todos los productos
  2. Automatismos y Motores
  3. 6504TV SILVER SERVICE® Curtain Machine. 3/4 H.P.
Tarifa pública

6504TV SILVER SERVICE® Curtain Machine. 3/4 H.P.

https://www.sktheatricaldraperies.com/web/image/product.template/339/image_1920?unique=fe17fcc
Rango de precios
$8670.75
Bulto Completo:
Item #0024-001586

$ 8,670.75 8670.75 USD $ 8,670.75

$ 0.00

    Esta combinación no existe.

    1 yarda(s)
    914.99 meter(s)
    Mínimo de compra: 1 Unidad(es)
    AÑADIR AL CARRITO
    Especificaciones del Producto
    Do you have questions about this product?
    Contactus for answers.

    6504TV HERCULES® Curtain Machine. 3/4 H.P.

    The No. 6504-TV curtain motor combines maximum versatility with the power needed to operate small to medium sized draw curtains. Draw curtain machine with electronic frequency control. The most versatile of the ADC line, these machines provide all of the features of an intermediate draw machine plus user definable variable speed control, acceleration ramps, deceleration ramps, overload protection, low voltage control, emergency stop loops and a host of other features. In addition these machines allow the use of inverter duty 3-phase motors on single phase power sources. Machines are equipped with integral limit switches for deceleration and emergency over-travel, programmable frequency drive units, low-voltage control, and can be operated from any number of remote control stations (except speed adjustment if so equipped). Drum is 10" diameter x 5" wide and is grooved for 3/16 wire center cable. Cable speed is 0 to 86 fpm. 

    Guard (ME-2) not shown. Required for ETL compliance. 

    Draw curtain machines and drapery motors cannot be used for lifting, since they are not designed for an overhung type of load.



    Stop/Start/Reverse from any point of travel. Integral DC drive board provides variable speed (0 to 40 fpm) as well as pre-set maximum obtainable speed and minimum obtainable speed. 

    Control voltage is 24 VDC. Standard control is from a 3 push button station labeled Open, Close and Stop. Any number of remote control stations can be used. Speed is varied from a dial located on the machine. Optional RF based wireless remote control (Model WRC-1) can be added.

     

    GROOVED CABLE DRUM 

    Assures positive drive without cable slippage. Constructed of aluminum 10" diameter x 5" long. Coated wire-center cable must be used. Drum must be at least 10' from track live end pulley, or last pulley in system to allow cable to wind properly on drum. 

    EMERGENCY HAND CRANK 

    Facilitates hand operation of curtain in case of mechanical or power failure. Not supplied when cable tension device is furnished. 

    VARIABLE SPEED (0-72 RPM)
    Speed cannot be adjusted while machine is operating without affecting limit positions.


    6504TV HERCULES® Curtain Machine. 3/4 H.P.

    Horsepower: 1/2 

    Volts: 120/220 (1 phase) or 208/230 (3 phases) 

    Phase: 1 or 3 

    Cable speed: 86 fpm 

    Curtain Separation Speed: 0 to 3 fps 

    Maximum one way cable travel: 45 feet. 

    Number of wires for remote control: 6 

    Control voltage: 24 VAC 

    Approximate dimensions: 13"L x 16"W x 27"H 

    Approximate shipping weight: 120 lbs (175 lbs with guard) 

    Odoo text and image block

    Productos Similares

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    Productos Relacionados

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    Productos Sugeridos

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.