2907TV SILVER SERVICE® lift curtain machine. 1/2 H.P.

https://www.sktheatricaldraperies.com/web/image/product.template/352/image_1920?unique=5a9cc18
Rango de precios
$9367.95
Bulto Completo:
Item #0024-001599

9,367.95 9367.95 USD 9,367.95

0.00

  • Velocidad del cable
  • Voltage del controlador
  • Maximo recorrido del cable
  • Número de conductores por control remoto
  • Fases
  • Voltios
  • Alto
  • Largo
  • Ancho
  • Peso
  • Velocidad de apertura de cortina
  • Características clave
  • Potencia
  • Tracción máxima del cable

Esta combinación no existe.

1 yarda(s)
914.99 meter(s)
Mínimo de compra: 1 Unidad(es)
Do you have questions about this product?
Contactus for answers.

2907TV SILVER SERVICE® lift curtain machine. 1/2 H.P.

Lift curtain machine with electronic frequency control, and rated to lift a 100 pound load when connected to a standard cable type lift system. TV Variable speed lift machines are the most versatile of the ADC line. These machines provide all of the features of an intermediate lift machine plus user definable variable speed control, acceleration ramps, deceleration ramps, overload protection, low voltage control, emergency stop loops and a host of other features. In addition these machine allow the use of inverter duty 3-phase motors on single phase power sources. Machines are equipped with integral limit switches for deceleration and emergency over-travel, programmable frequency drive units, low-voltage control, and can be operated from any number of remote control stations (except speed adjustment if so equipped). Output drum is 6" diameter x 14" long and is grooved for 3/16" wire center cable. Maximum cable travel is 70'. Cable speed is 0 to 54 fpm. 

Guard (ME-1) not shown. Required for ETL compliance. 

These machines are not to be used for the lifting, supporting, or transporting of people. These machines should not be used to move objects over areas where people are present unless suitable safety devices are installed.

GROOVED CABLE DRUM 

Assures positive drive without cable slippage. Constructed of powder coated steel 6" diameter x 14" long. Coated wire-center cable must be used. Provides up to 70' of cable travel. 

MAGNETIC FRICTION BRAKE 

Furnished as either part of the motor (brakemotor) or inline with the motor and gear reduction unit. Helps to provide precise stopping in both directions. 

CONTROL STATIONS 

Three-button type. Provide Stop\Start\Reverse control from any point of travel. No limit to the number of remote control stations that can be used. Two supplied with each machine, one fixed to the machine and one for use as a remote control station.

MAGNETIC CONTACTOR 

Provides Start/Stop/Reverse control for the machine. Compatible with most automation systems. LVCS Low Voltage Control System, 24 VAC standard. 

ROTARY LIMIT SWITCH 

Allows for user defined pre-set stops for the "Full Raise" and "Full Lower" positions. 

DISCONNECT SWITCH 

Toggle switch which removes power to machine’s internal circuitry. 

OVERLOAD PROTECTIVE BREAKER 

Automatic type helps protect machine, track and curtain against effects of accidental overload. Must be manually reset. 

THERMAL OVERLOAD 

Built into some motors to help prevent possible damage to the motor due to overheating (furnished on some single phase motors only). 

SAFETY RELAY 

Prevents single phase motor from continuing to run in the same direction when the push-buttons are pressed at the same instant as the limit switch is tripped. 

2907 SILVER SERVICE® lift curtain machine. 1/2 H.P.

Horsepower: 1/2 

Volts: 115/220 (1 phase) - 208/230 (3 phases) 

Phase: 1 or 3 

Lifting speed: 0-54 fpm (variable) 

Maximum lift capacity: 100 lbs. 

Maximum cable travel: 70 feet. 

Control Voltage: 24 VAC 

Number of wires for remote control: 6 (plus ground). 

Approximate dimensions: 38"L x 25"W x 19"H 

Approximate shipping weight: 275 lbs 

Odoo text and image block

Especificaciones

Fases 1 - 3
Voltios 120/220 (1 phase) - 208/230 (3 phases)
Características clave Rotary Limit Switches - Disconnect Switch - Overload Protective Breaker - Grooved Cable Drum - Variable Speed - Control Stations - Magnetic Friction Brake
Velocidad del cable 0-54 fpm (0-16.5 mpm)
Voltage del controlador 24 VAC
Maximo recorrido del cable 70 ft (21 m)
Número de conductores por control remoto 6 (plus ground)
Alto 19 in (48 cm)
Largo 38 in (96.5 cm)
Ancho 25 in (63.5 cm)
Peso 275 lbs (125 kg)
Velocidad de apertura de cortina NA
Potencia 1/2 Horsepower
Tracción máxima del cable 100 lbs (45 kg)